Comments for pembo.co.uk http://www.pembo.co.uk NSLU2, Wii Homebrew and more Thu, 16 Feb 2012 09:17:01 +0000 hourly 1 Comment on IPKG Web by pembo http://www.pembo.co.uk/2008/08/21/ipkg-web/#comment-414 pembo Thu, 16 Feb 2012 09:17:01 +0000 http://www.dpembo.ukfsn.org/2008/08/21/ipkg-web/#comment-414 IPKG runs on the management server that hosts the uNSLUng configuration pages - I can't recall if you can change the port on this - but by default this runs on port 80 and I normally wouldn't install anything else on uNSLUng on port 80 as the config screens are pretty useful in uNSLUng. When I used uNSLUng, I installed lighttpd on port 8080, but opened port 80 on my router mapped to the NSLU2 ip address on port 8080. IPKG runs on the management server that hosts the uNSLUng configuration pages – I can’t recall if you can change the port on this – but by default this runs on port 80 and I normally wouldn’t install anything else on uNSLUng on port 80 as the config screens are pretty useful in uNSLUng.

When I used uNSLUng, I installed lighttpd on port 8080, but opened port 80 on my router mapped to the NSLU2 ip address on port 8080.

]]> Comment on IPKG Web by the4tress http://www.pembo.co.uk/2008/08/21/ipkg-web/#comment-413 the4tress Wed, 15 Feb 2012 21:03:26 +0000 http://www.dpembo.ukfsn.org/2008/08/21/ipkg-web/#comment-413 How can I change the port for this? I already have something running on 80 and I would like this to run on 8080. Thanks. How can I change the port for this? I already have something running on 80 and I would like this to run on 8080.

Thanks.

]]> Comment on New site design! by pembo http://www.pembo.co.uk/2011/09/01/pembo-co-uk-new-layout/#comment-211 pembo Sun, 18 Sep 2011 06:30:53 +0000 http://www.pembo.co.uk/?p=691#comment-211 I've also now got the pembo.eu domain, which also ends up here... I’ve also now got the pembo.eu domain, which also ends up here…

]]> Comment on BootMii Configuration Editor Forwarder & Channel by inyourfacemike http://www.pembo.co.uk/2010/09/07/bootmii-configuration-editor-forwarder-channel/#comment-208 inyourfacemike Sun, 26 Jun 2011 08:57:06 +0000 http://www.dpembo.ukfsn.org/?p=522#comment-208 it's goood!!! it’s goood!!!

]]> Comment on BootMii Configuration Editor v2.6 Released! by FW 4.3 moden mit Kindersicherung, hat alles geklappt? - Seite 58 - MonkeyDesk.at http://www.pembo.co.uk/2010/09/05/bootmii-configuration-editor-v2-6-released/#comment-207 FW 4.3 moden mit Kindersicherung, hat alles geklappt? - Seite 58 - MonkeyDesk.at Thu, 02 Dec 2010 00:28:54 +0000 http://www.dpembo.ukfsn.org/?p=519#comment-207 [...] [...] [...] [...]

]]> Comment on NSLU2 Debian Installation Notes by Bharat Jhaveri http://www.pembo.co.uk/2009/09/15/nslu2-debian-installation-notes/#comment-185 Bharat Jhaveri Tue, 21 Sep 2010 07:22:37 +0000 http://www.dpembo.ukfsn.org/?p=319#comment-185 debootstrap --arch=arm etch /etch-root http://ftp.de.debian.org/debian/ command did not work. I get the error: Usbserver:/etc/mediatomb# sudo debootstrap --arch=arm etch /etch-root http://ftp.nl.de.debian.org/debian/ I: Retrieving Release E: Failed getting release file http://ftp.nl.de.debian.org/debian/dists/etch/Release Can you help? I do want Twonkymedia work on debian on NSLU2. Thanks. debootstrap –arch=arm etch /etch-root http://ftp.de.debian.org/debian/ command did not work. I get the error:

Usbserver:/etc/mediatomb# sudo debootstrap –arch=arm etch /etch-root http://ftp.nl.de.debian.org/debian/
I: Retrieving Release
E: Failed getting release file http://ftp.nl.de.debian.org/debian/dists/etch/Release

Can you help? I do want Twonkymedia work on debian on NSLU2. Thanks.

]]> Comment on NSLU2 Debian Installation Notes by Bharat Jhaveri http://www.pembo.co.uk/2009/09/15/nslu2-debian-installation-notes/#comment-184 Bharat Jhaveri Mon, 20 Sep 2010 20:23:12 +0000 http://www.dpembo.ukfsn.org/?p=319#comment-184 Thanks for the notes. I had hard time making twonkeymedia work with Debian on NSLU2. I am going to try your suggestions with etch environment. Thanks for the notes. I had hard time making twonkeymedia work with Debian on NSLU2. I am going to try your suggestions with etch environment.

]]> Comment on TetWiis v1.1 Released! by Alejandro Lizarraga http://www.pembo.co.uk/2010/09/12/tetwiis-v1-1-released/#comment-209 Alejandro Lizarraga Mon, 13 Sep 2010 23:02:46 +0000 http://www.dpembo.ukfsn.org/?p=530#comment-209 Thank you very much for implementing anti-clockwise rotation :) Everything is good now, you have made a wonderful game! Just a question... How do you increase the falling speed through levels? Until level 20 speed almost does not increase at all, but past level 20 it increases exponentially! Maybe a better formula for increasing it can be used in order to increase it progressively as you advance through levels? Have a great day! Thank you very much for implementing anti-clockwise rotation :)
Everything is good now, you have made a wonderful game!

Just a question… How do you increase the falling speed through levels? Until level 20 speed almost does not increase at all, but past level 20 it increases exponentially! Maybe a better formula for increasing it can be used in order to increase it progressively as you advance through levels?

Have a great day!

]]> Comment on Tetwiis Dev Update by pembo http://www.pembo.co.uk/2010/08/22/tetwiis-dev-update/#comment-206 pembo Tue, 24 Aug 2010 22:21:25 +0000 http://www.dpembo.ukfsn.org/?p=501#comment-206 - Music looping is probably about as good as I'm going to get it - Now has a ticking clock when you're near to the top of the screen - Music looping is probably about as good as I’m going to get it
- Now has a ticking clock when you’re near to the top of the screen

]]> Comment on Tetwiis Update by pembo http://www.pembo.co.uk/2010/08/11/tetwiis-update-8/#comment-205 pembo Sun, 22 Aug 2010 23:26:20 +0000 http://www.dpembo.ukfsn.org/?p=494#comment-205 - Classic Controller support implemented - Getting closer with the music - adding 50ms at a time until it repeats right! - Classic Controller support implemented
- Getting closer with the music – adding 50ms at a time until it repeats right!

]]>